Catalog Advanced Search

Search by Categories
Search in Packages
Search by Format
Search by Type
Search by Date Range
Products are filtered by different dates, depending on the combination of live and on-demand components that they contain, and on whether any live components are over or not.
Start
End
Search by Keyword
Sort By
  • Basic Plumbing Design II 2020

    Contains 6 Component(s), Includes Credits

    Basic Plumbing Design II, February 2020

    2020 Workshop Series
    February 6-7 in Phoenix, AZ
    Henderson Engineers, 5343 N. 16th Street, Suite 460, Phoenix, AZ 85016




    Building off our Basic Plumbing Design I class, we will continue with a more in-depth look at a complete building design. It is essential when designing a building that we not only drill down into the detail but that we also take a step back and see a global view of our building in relationship with all other trades. As plumbing engineers and designers we are tasked with providing code compliant, well planned and thought-out plumbing systems that protect the health and welfare of the public and that are owner and maintenance friendly. This class we will put pen to paper. We will layout our basic plumbing systems, size these systems, calculate and size the equipment and coordinate with the architectural layout, structural elements of the building and other trades inside and outside the building. It is not required to have taken Basic Plumbing Design I course.*  This course is happening just prior to the CPD Review Class at the same location.

    The section will review the basics of storm drain pipe sizing, routing and coordination - Storm Sizing, Routing & Coordination – 2 Hours

    Learning Objectives:

    • Properly size storm and overflow drain piping
    • Properly select equipment needed within the storm drainage system.
    • Correctly coordinate pipe routing with building and structure within the building
    • Understand correct pipe material to be used based upon application and ground movement.

    The section will review the basics of domestic water pipe sizing, routing and coordination - Domestic Cold Water Sizing – 1.5 Hours, Domestic Hot Water Sizing – 0.5 Hour, Domestic Heating Water Equipment Sizing and Selection – 1.5 Hours 

    Learning Objectives:

    • Properly size domestic cold water piping
    • Properly size domestic hot water piping
    • Properly select and size the domestic heating water equipment to fit specific projects.
    • Correctly coordinate space allocations within the building
    • Understand how to correctly size domestic hot water return systems.

    This section provides the basic plumbing design of sanitary sewer systems.  The program will review the basics of sanitary sewer pipe sizing, routing and coordination - Sanitary Sewer Sizing, Routing & Coordination – 2.5 Hours 

    Learning Objectives:

    • Properly size sanitary sewer piping
    • Properly size sanitary vent piping
    • Properly select equipment needed within the sanitary sewer system.
    • Correctly coordinate pipe routing with building and structure within the building
    • Understand correct pipe material to be used based upon application and ground movement.

    The section will review the basics of natural gas pipe sizing, routing and coordination - Natural Gas Sizing, Routing & Coordination – 1.5 Hours 

    Learning Objectives:

    • Properly size natural gas piping
    • Properly select equipment needed within the natural gas system.
    • Correctly coordinate pipe routing with site utilities, building and structure within the building

    The section will review the basics understanding of coordination between trades and dealing with structural conflicts within the building. Plumbing System Coordination – 2.5 Hours 

    Learning Objectives:

    • Review and discuss the continual coordination that must occur throughout design and construction.
    • How do deal with structural conflicts and correctly understanding limitations within the plumbing design
    • Correctly coordinate pipe routing with building and structure within the building

    Michael Danielson, CPD, GPD

    Michael Danielson, CPD, GPD, has been with Reed, Wells, Benson & Co. for 20 years and is curretly the Department Head for Plumbing and Fire Protection. He has been the Education Chairman for the ASPE Dallas/Ft. Worth Chapter since 2006. Michael earned his Bachelor of Science in Marine Engineering Systems from the United States Merchant Marine Academy in 1995. He brings with him a wealth of experience in designing plumbing systems in healthcare, municipal, multifamily, and institutional designs. 

  • Client Retention

    Contains 4 Component(s), Includes Credits Recorded On: 07/26/2016

    This session will focus on the strategy, tactics and implementation necessary to hold onto those valuable assets, your repeat clients.

    This session will focus on the strategy, tactics and implementation necessary to hold onto those valuable assets, your repeat clients.

  • Communication for More Impactful Teams

    Contains 2 Component(s)

    Part of AYP Leadership Development Series. Register for this individual session or the full series to gain access to all 3 webinars.

    We all tend to communicate in the way most comfortable to us, rather than translating what we're trying to get across into our peer's best for of communication. Dive into different communication approaches to create more impact, and get your message across with less friction. Check out this webinar for practice scenarios and new approaches! 

    This is the third webinar in the three-part series.

  • Comparing the Design Considerations of Non-Metallic Plumbing Systems

    Contains 4 Component(s), Includes Credits Recorded On: 02/18/2014

    Comparing the Design Considerations of Non-Metallic Plumbing Systems

    This one-hour seminar will provide Plumbing Engineers and Designers, Building Officials, Plumbing Contractors, and Building Maintenance Engineers with an in-depth, technical comparison of the various non-metallic plumbing system options available on the market today. As a growing number of non-metallic alternatives continue to replace traditional metal plumbing systems, this webinar will provide participants with the knowledge to make informed decisions about which non-metallic system is the best choice for any given project requirements. Topics include:

    Features and benefits of each of the non-metallic plumbing system materials
    How various fitting systems and joining techniques can affect project reliability, time and cost
    Model code considerations and standards requirements that can impact your design specification
    Life-limiting factors of non-metallic pipe and fitting systems

    This webinar was sponsored by Lubrizol. Original air date: May 2014


    The Presenter: Mark Tanner, CPD

    Mark has spent 30 years in the consulting engineering field during which time he achieved his “Certified in Plumbing Design” designation. Mark has spent a great majority of his career designing plumbing, piping, HVAC and fire protection systems, while also managing numerous construction projects – everything from military installations on various bases around the country to various marina systems and other high-tech projects for Intel and the Biosphere 2 project in Oracle, Arizona.

    In 2008, Mark made a professional career move and joined the Advanced Materials Division of The Lubrizol Corporation, a chemical company located in Northeast Ohio which makes and compounds raw materials for various products, including the innovative resins and compounds used in the production of FlowGuard®, BlazeMaster® and Corzan® piping systems. Among his role as a piping systems consultant for Lubrizol, Mark provides education and training on the technical aspects of CPVC piping systems and how they may fit into various construction projects.

  • Conserving Water Through the Latest Updates to High Efficiency Fixtures

    Contains 4 Component(s), Includes Credits Recorded On: 09/27/2016

    Conserving Water Through the Latest Updates to High Efficiency Fixtures

    Conserving Water Through the Latest Updates to High Efficiency Fixtures

  • CPD Practice Test 1

    Contains 1 Component(s)

    CPD Practice Test 1

    This is one of two practice tests available for purchase. This practice test is a 30-question multiple choice test and does not award CEUs/PDHs. You have an unlimited amount of time to complete the practice test, but it is recommended you complete the practice test in one sitting. References or explanations are provided after your first attempt on the correct answer.

  • CPD Practice Test 2

    Contains 1 Component(s)

    CPD Practice Test 2

    This is second of two practice tests available for purchase. This practice test is a 30-question multiple choice test and does not award CEUs/PDHs. You have an unlimited amount of time to complete the practice test, but it is recommended you complete the practice test in one sitting. References or explanations are provided after your first attempt on the correct answer.

  • CPD Practice Tests

    Contains 2 Product(s)

    CPD Practice Tests

    Purchase one or both CPD practice tests. Each test is 30 questions and you have an unlimited amount of time to complete them. You can review them again at any time. These practice tests do not award any CEUs or PDHs. Explanations and/or references are provided at the conclusion of the test.

  • CPD Recert - 10 hours external training

    Contains 2 Component(s)

    CPD Recert - 10 hours external training

    CPD Recert - 10 hours external training

  • CPD Recert - 11 hours external training

    Contains 2 Component(s)

    CPD Recert - 11 hours external training

    CPD Recert - 11 hours external training