Basic Plumbing Design II 2020

2020 Workshop Series
February 6-7 in Phoenix, AZ
***Location has changed, TBD***




Building off our Basic Plumbing Design I class, we will continue with a more in-depth look at a complete building design. It is essential when designing a building that we not only drill down into the detail but that we also take a step back and see a global view of our building in relationship with all other trades. As plumbing engineers and designers we are tasked with providing code compliant, well planned and thought-out plumbing systems that protect the health and welfare of the public and that are owner and maintenance friendly. This class we will put pen to paper. We will layout our basic plumbing systems, size these systems, calculate and size the equipment and coordinate with the architectural layout, structural elements of the building and other trades inside and outside the building. It is not required to have taken Basic Plumbing Design I course.*  This course is happening just prior to the CPD Review Class at the same location.

The section will review the basics of storm drain pipe sizing, routing and coordination - Storm Sizing, Routing & Coordination – 2 Hours

Learning Objectives:

  • Properly size storm and overflow drain piping
  • Properly select equipment needed within the storm drainage system.
  • Correctly coordinate pipe routing with building and structure within the building
  • Understand correct pipe material to be used based upon application and ground movement.

The section will review the basics of domestic water pipe sizing, routing and coordination - Domestic Cold Water Sizing – 1.5 Hours, Domestic Hot Water Sizing – 0.5 Hour, Domestic Heating Water Equipment Sizing and Selection – 1.5 Hours 

Learning Objectives:

  • Properly size domestic cold water piping
  • Properly size domestic hot water piping
  • Properly select and size the domestic heating water equipment to fit specific projects.
  • Correctly coordinate space allocations within the building
  • Understand how to correctly size domestic hot water return systems.

This section provides the basic plumbing design of sanitary sewer systems.  The program will review the basics of sanitary sewer pipe sizing, routing and coordination - Sanitary Sewer Sizing, Routing & Coordination – 2.5 Hours 

Learning Objectives:

  • Properly size sanitary sewer piping
  • Properly size sanitary vent piping
  • Properly select equipment needed within the sanitary sewer system.
  • Correctly coordinate pipe routing with building and structure within the building
  • Understand correct pipe material to be used based upon application and ground movement.

The section will review the basics of natural gas pipe sizing, routing and coordination - Natural Gas Sizing, Routing & Coordination – 1.5 Hours 

Learning Objectives:

  • Properly size natural gas piping
  • Properly select equipment needed within the natural gas system.
  • Correctly coordinate pipe routing with site utilities, building and structure within the building

The section will review the basics understanding of coordination between trades and dealing with structural conflicts within the building. Plumbing System Coordination – 2.5 Hours 

Learning Objectives:

  • Review and discuss the continual coordination that must occur throughout design and construction.
  • How do deal with structural conflicts and correctly understanding limitations within the plumbing design
  • Correctly coordinate pipe routing with building and structure within the building

Michael Danielson, CPD, GPD

Michael Danielson, CPD, GPD, has been with Reed, Wells, Benson & Co. for 20 years and is curretly the Department Head for Plumbing and Fire Protection. He has been the Education Chairman for the ASPE Dallas/Ft. Worth Chapter since 2006. Michael earned his Bachelor of Science in Marine Engineering Systems from the United States Merchant Marine Academy in 1995. He brings with him a wealth of experience in designing plumbing systems in healthcare, municipal, multifamily, and institutional designs. 

Key:

Complete
Failed
Available
Locked
Basic II Thursday
02/06/2020 at 8:00 AM (MST)   |  8 hours  |  Attendance Required
02/06/2020 at 8:00 AM (MST)   |  8 hours  |  Attendance Required
Basic II Friday
02/07/2020 at 8:00 AM (MST)   |  8 hours  |  Attendance Required
02/07/2020 at 8:00 AM (MST)   |  8 hours  |  Attendance Required
Learning Assessment
25 Questions  |  4 attempts  |  19/25 points to pass
25 Questions  |  4 attempts  |  19/25 points to pass
Post-workshop Survey
6 Questions
Certificate
1.30 CEUs credits  |  Certificate available
1.30 CEUs credits  |  Certificate available
North Carolina PE Evaluation
9 Questions
9 Questions Please complete this if you hold a PE license in NC. Only required if you hold a PE license in NC.